Black Horse Model BH180, Инструкция по эксплуатации

Страница: 15 / 36

Instruction manual WESTLAND LYSANDER Item code: BH170
Screw
Linkage stopper
4x4mm
2x10mm
2mm
Pushrod wire
Adjust the throttle input (transmitter throttle
stick), throttle trim movement and the
carburattor opening to the suitable position
and screw in the 4x4mm set screw.
Fuselage top side
Throttle servo
MOUNTING THE COWL
Remove the muffler and needle valve assembly
from the engine. Slide the fiberglass cowl over the
engine.
Measure and mark the locations to be cut out
for engine head clearance, needle valve, muffler.
Remove the cowl and make these cutouts using a
rotary tool with a cutting disc and a rotary sanding
drum attachment.
Slide the cowl back into place. Align the front of
the cowl with the crankshaft of the engine. The
1)
2)
3)
front of the cowl should be positioned so the
crankshaft is in the middle of the precut opening.
Hold the cowl firmly in place using several pieces
of masking tape.
While holding the cowl firmly in position, drill
four 1,6mm pilot holes through both the cowl and
the side edges of the firewall.
Using a 3mm drill bit, enlarge the four holes in
the cowling.
4)
5)
15