I/C FLYING GUIDELINES
Made in Vietnam
ALWAYS
take off into the wind.
When ready to fly, first extend
the transmitter aerial.
Operate the control sticks on the
transmitter and check that the
control surfaces move freely and in
the CORRECT directions.
ALWAYS land the model INTO
the wind, this ensures that the
model lands at the slowest possible
speed.
Switch on the transmitter.
OFF - ON
OFF - ON
Check that the wings are
correctly fitted to the fuselage.
If the model does not respond
correctly to the controls, land it
as soon as possible and correct
the fault.
Empty the fuel tank after flying, fuel
left in the tank can cause
corrosion and lead to engine
problems.
Check that the transmitter batteries
have adequate power.
Switch on the receiver.
OFF - ON
Switch off the receiver.
OFF - ON
Switch off the transmitter.
OFF - ON
OFF - ON
Содержание BH174
