Black Horse Model BH174, Инструкция по эксплуатации

Страница: 11 / 51

SBACH 342 Item code: BH174 Instruction Manual
Cut off shaded portion
Assemble left and right
sides the same way
1. Install the control horn into the aileron.
2. Locate the metal rod wire, screw the plastic link ball
onto the threaded end of the wire.
3. Plug the aileron servo into the receiver and center
the servo. Install the servo arm onto the servo. The
servo arm should be perpendicular to the servo and
point toward the middle of the wing.
4. Center the aileron and hold it in place using a
couple of pieces of masking tape. Adjust the
linkage until the aileron and the servo arm are
both centered and then tighten the nut against.
Remember use thread locking compound to
secure.
5. Repeat step 1 - step 4 for the second aileron
linkage.
< Bottom view >
Aileron
INSTALLING THE AILERON LINKAGES
3mm Washer
2
4
3 x 12mm Screw
Aluminum ball
4
4
3 x 65mm
Aluminum ball
Aluminum ball
Aileron Rod
x2
3 x 25mm Cap Screw
Horn
2
3 x 65mm Aileron rod
2
2
2
11