To avoid scratching your new airplane, do not
unwrap the pieces until they are needed for assembly.
Cover your workbench with an old towel or brown
paper, both to protect the aircraft and to protect the
table. Keep a couple of jars or bowls handy to hold the
small parts after you open the bag.
SUGGESTION
Please trial fit all the parts. Make sure you have
the correct parts and that they fit and are aligned
properly before gluing! This will assure proper
assembly.
is hand made from natural
materials, every plane is unique and minor
adjustments may have to be made. However, you
should find the fit superior and assembly simple.
The painted and plastic parts used in this kit are
fuel proof. However, they are not tolerant of many
harsh chemicals including the following: paint thinner,
C/A glue accelerator, C/A glue debonder and acetone.
Do not let these chemicals come in contact with the
colors on the covering and the plastic parts.
Caution:
This model is not a toy!
If you are a beginner to this type of powered
model, please ask an experienced model flyer for help
and support. If you attempt to operate the model
without knowing what you are doing you could easily
This kit
NOTE
Black Horse Model guarantees the component
parts in this kit to be free from defects in both material
and workmanship at the date of purchase by the
purchaser.
This warranty does not cover cosmetic damage
or damage due to acts of God, accident, misuse,
abuse, negligence, commercial use, or modification
of or to any part of the Product.
This warranty does not cover damage due to
improper installation, operation, maintenance, or
attempted repair by anyone other than Black Horse
Model.
Return only the component part that is defective
in materials or workmanship. Please pack the unit
carefully and insure it, as this warranty does not cover
loss or damage in transit.
WARRANTY
DISCLAIMER
Read this disclaimer carefully before using this
product. Please strictly follow the instruction manual
to assemble and use this.
In that Black Horse Model has no control over the
final assembly or material used for final assembly,
black Horse Model is not responsible for loss of use,
or other incidental or consequential damages.
Furthermore, Black Horse Model cannot be held
liable for personal injury or property damage caused
by the use or misuse of Black Horse Model products.
By the act of using the user-assembled products, the
user accepts all resulting liability.
injure yourself or somebody else. Please keep your
safety and well-being in mind at all times.
Important:
Before you start construction
Even if you have built a large number of RC
modelsplease read right through these instructions
and check all the kit components against the parts list.
We have taken great trouble to keep construction as
simple as possible, without making any compromises
in the area of safety.
Note regarding the film covering
Minor creases or bubbles may develop in the film
covering due to major fluctuations in weather
conditions (temperature, humidity etc.); in rare cases
you may even find a slight warp in a component. These
minor faults are in the nature of film-covered built-up
wooden structures, and can easily be corrected using
a heat gun, as commonly used for modelling.
Creases:
Blow warm air over the area and rub
down with a soft cloth.
Wing wrap:
Hold the panel twisted gently in the
opposite direction to the wrap, and apply warm air to
remove the creases from the covering.
Caution!
do not heat the film more than is
absolutely necessary. If the air or the iron is too hot, the
film may melt and holes may be formed.
This model is highly pre-fabricated and can be
built in a very short time. However, the work which you
have to carry out is important and must be done
carefully. The model will only be strong and fly well if
you complete your tasks competently- so please work
slowly and accurately.
When self-tapping screws have to be screwed
into wood, apply a little white glue to prevent them
shaking loose: just squirt white glue into the hole and fit
the screw
§
This model is not a toy and pilots must be over the
age of 14.
§
Be sure that no other flyers are using your radio
frequency.
§
Do not smoke near fuel.
§
Store fuel in a cool, dry place, away from children
and pets.
§
Wear safety glasses.
§
The glow plug clip must be securely attached to
the glow plug.
§
Do not flip the propeller with your fingers.
§
Keep loose clothing and wires away from the
propeller.
§
Do not start the engine if people are near. Do not
stand in line with the side of the propeller.
§
Make engine adjustments from behind the
propeller only. Do not reach around the spinning
propeller.
§
Moisture causes damage to electronics. Avoid
water exposure to all equipment not specifically
designed and protected for this purpose.
SAFETY PRECAUTION:
MXS Item code: BH167
3