28
SPEED AIR-40 _
Item code:BH08-A.
Instruction Manual.
*If possible, first attempt to balance the model
by changing the position of the receiver bat-
tery and receiver. If you are unable to obtain
good balance by doing so, then it will be nec-
essary to add weight to the nose or tail to
achieve the proper balance point.
o
1) We highly recommend setting up a plane
using the control throws listed.
o
2) The control throws should be measured
at the widest point of each control surface.
o
3) Check to be sure the control surfaces
move in the correct directions.
Ailerons : 15mm up 15mm down.
Elevator : 10mm up 10mm down.
Rudder : 15mm right 15mm left.
CONTROL THROWS.
Aileron Control
10
10
o
1) Completely charge your transmitter and
receiver batteries before your first day of fly-
ing.
o
2) Check every bolt and every glue joint in
your plane to ensure that everything is tight
and well bonded.
o
3) Double check the balance of the airplane.
o
4) Check the control surface.
o
5) Check the receiver antenna . It should
be fully extended and not coiled up inside the
fuselage.
o
6) Properly balance the propeller.
We wish you many safe and enjoyable
flights with your SPEED AIR - 40.
PRE-FLIGHT CHECK.