5
GLASAIR -
Item code: BH74
.
Instruction Manual
1
4) Drill 1,6mm pilot holes through the block
of wood for each of the four mounting screws
provided with the servo.
1
3) Using the thread as a guide and using
masking tape, tape the servo lead to the end
of the thread: carefully pull the thread out.
When you have pulled the servo lead out, re-
move the masking tape and the servo lead
from the thread.
o
5. Instal servo tray with aileron servo into
the wing as same as picture below.
2x10mm.
Secure.
Install aileron control horn as same as picture
below.
Control horn of Aileron
INSTALLING THE AILERON CONTROL HORN.
Electric wire
Thread
A+B Epoxy
PLUS glue.
Drill a hole 1.7mm
diameter
