11
GLASAIR -
Item code: BH74
.
Instruction Manual
Locate the long piece of wire used for the
throttle pushrod. One end of the wire has been
pre-bend in to a “Z” bend at the factory. This
“Z” bend should be inserted into the throttle
arm of the engine when the engine is fitted onto
the engine mount. Fit the engine to the engine
mount using the screws provided.
Left side
Drill a hole
5.2mm diameter.
Pushrod wire.
145mm
Mark point
INSTALLING THE ENGINE.
4 x 30mm
Secure
Right side
