13
•
Move the heel on the stabilized position shown at
PICTURE L
by rotating the heel head with the hands.
Then rotate the heel flap towards the ski tail up to the back end of the rotation range.
•
Check that the toe part is in the position shown at
PICTURE M
, ready to receive the boot, free from ice,
snow or other debris. If toe is not in the proper position, manually press on the front locking lever in
order to reach the stabilized position shown at
PICTURE M
.
•
Move the boot tip towards the toe part, matching the front TECH insert seats with the toe hooking pins
(
PICTURE N
). From this position, vertically push on the toe part to step in. (
PICTURE O/P)
. Rotate a few
times the boot in order to check the proper boot-binding coupling, as shown at
PICTURE P
.
PICTURE L
PICTURE M
PICTURE N
PICTURE O
