OPERATION OF THE LOG SPLITTER
Operate the log splitter from within the operation zone as shown in the
diagrams below. The operator has the safest and most efficient access
to the control valve and the beam in these locations.
Failure to operate the log splitter in this position can result in
serious injury or death.
• Make sure the operator knows how to stop and disengage the
controls before operating.
• Do not place hands or feet between the log and splitting
wedge during forward or reverse stroke. Serious injury or
death could result.
• Do not
straddle or step over the log splitter during operation.
• Do not
reach or bend over the log splitter to pick up a log.
• Do not
attempt to split two logs on top of each other.
• Do not
attempt to cross split a log.
• Do not
attempt to load your log splitter when the ram or wedge is
in motion.
•
Use your hand to operate the control lever on the valve. Do not use
your foot, a rope or any extension device.
• Do not
move the log splitter while the engine is running.
• Never leave the equipment unattended while the engine is
running.
Shut off the engine even if you are leaving the log splitter
for a short period of time.
•
Avoid contact with the muffler and other hot areas of the engine
during operation or after running to prevent burns.
DANGER
DANGER
OPERATOR ZONE
OPERATOR ZONE
7
!
VERTICAL OPERATION
HORIZONTAL OPERATION
!
IMPORTANT SAFETY INFORMATION
