English
7
Fig. B
13
12
Installing and Removing Attachments
(Fig. A, C, D)
WARNING:
Shock hazard.
Under no
circumstances should this product be used near water.
WARNING:
Burn hazard.
Moving parts
within the base unit become hot during use. Avoid
contact with moving parts within base unit when
removing and installing accessories.
WARNING:
Before assembly, remove the
battery from the base unit. Remove any accessory
from the attachment before removing or installing
the attachment.
WARNING:
To reduce the risk of injury, do
not place fingers or other objects inside the base unit,
other than the attachments designed to work with the
base unit.
1. To fit an attachment or the extension pole to the base
unit
1
, align the attachment/pole base with the base
unit as shown in Fig. C and Fig. D.
2. Firmly push the attachment or extension pole onto the
base unit until it snaps into place and an audible click
is heard.
nOTE:
Attachments fit onto the extension pole in the same
manner as the base unit.
3. Ensure attachment is securely attached to the base
unit or extension pole by gently pulling it away. The
attachment or the extension pole should remain in place.
4. To remove an attachment or extension pole, depress
the release button
8
or
10
located on the side of
the attachment or extension pole and pull attachment
or extension pole away from the base unit or
extension pole.
nOTE:
Only use attachments that are specifically designed
for and are compatible with the base unit.
Fig. C
1
9
10
Fig. D
1
6
8
Proper Hand Position (Fig. E, F)
WARNING:
To reduce the risk of serious
personal injury,
ALWAYS
use proper hand position
as shown.
WARNING:
To reduce the risk of serious
personal injury,
ALWAYS
hold securely in anticipation
of a sudden reaction.
Base mode,
proper hand position requires one hand on the
main handle
2
.
Pole mode,
operate with one hand on the main handle
2
and one hand on the pole handle
7
.
Fig. E
2
