Black + Decker YARDMASTER BCASBL70, Инструкция по эксплуатации, Страница: 10 / 36

English
8
2
Fig. F
7
Installing and Removing the Battery Pack
(Fig. G)
WARNING:
Make certain the lock-off
switch is engaged to prevent switch actuation before
removing or installing battery.
nOTE: For best results, make sure your battery pack is
fully charged.
To install battery pack:
Insert battery pack 12 into battery
housing 14 as shown in Fig. G until fully seated and an
audible click is heard.
Make sure battery pack is fully seated and fully latched
into position.
To remove battery pack: Depress the battery release
button 13 on the battery and pull battery pack out
of appliance.
Fig. G
12
13
14
OPERATION
WARNING:
To reduce the risk of
serious personal injury, turn unit off and remove
the battery pack before making any adjustments
or removing/installing attachments or
accessories.
An accidental start-up can cause injury.
WARNING:
Shock hazard. Under no
circumstances should this product be used near water.
WARNING:
Burn hazard. Moving parts
within the base unit become hot during use. Avoid
contact with moving parts within base unit when
removing and installing accessories.
WARNING
:
Always use proper eye
protection that conforms to ANSI Z87.1 (CAN/CSA
Z94.3) while operating this appliance.
CAUTION:
Wear a filter mask if the operation
is dusty. Use of gloves, long pants and substantial
footwear is recommended. Keep long hair and loose
clothing away from openings and moving parts.
Switching On (Fig. H)
Base mode
1. Push the lock off switch 5 down and squeeze the ON/
OFF switch 4 . Once the unit is running, you may release
the lock off switch. The more the ON/OFF switch 4 is
depressed, the higher the speed of the base unit.
2. In order to keep the unit running you must continue
to squeeze the ON/OFF switch 4 . To turn the unit off,
release the ON/OFF switch 4 .
Pole mode
1. Push the lock off switch 5 down and squeeze the ON/
OFF switch 4 . Once the unit is running, you may release
the lock off switch. The more the ON/OFF switch 4 is
depressed, the higher the speed of the base unit.
2. In order to keep the unit running you must continue
to squeeze the ON/OFF switch
4
. To turn the unit off,
release the ON/OFF switch
4
.
Fig. H
5
4
Sweeping (Fig. I, J)
Base mode
• Hold the main handle with one hand as shown in Fig. I
and sweep from side to side with the nozzle several inches
above the surface.
• Slowly advance keeping the accumulated pile of debris
in front of you.