Black+Decker SEASONMASTER BCASK815D, Оригинальное руководство пользователя

Страница: 7 / 96

6 7 6
ENGLISH (Original instructions)
7
ENGLISH (Original instructions)
Features
This appliance includes some or all of the following features.
1. Power head
2. Main handle
3. Bail handle
4. On/off switch
5. Lock off switch
6. Hedge trimmer attachment
7. Hedge trimmer release button
8. Hedge trimmer blade
9. Guard
10. Extension pole
11. Pole grip
12. Extension pole release button
13. Battery
Charging a battery (fig. A)
BLACK+DECKER chargers are designed to charge
BLACK+DECKER battery packs.
u
Plug the charger (14) into an appropriate outlet before
inserting a battery pack (13).
u
Insert the battery pack (13) into the charger, making sure
the battery pack is fully seated in the battery slots (Figure
A).
The LED (14a) will flash indicating that the
battery is being charged.
The completion of charge is indicated by the
LED remaining on continuously. The pack is
fully charged and may be used at this time or
left in the charger.
u
Recharge discharged batteries as soon as possible after
use or battery life may be greatly diminished.
For longest battery life, do not discharge batteries fully.
It is recommended that the batteries be recharged after
each use.
Charger diagnostics (fig. B)
This charger is designed to detect certain problems that can
arise with the battery packs or the power source. Problems
are indicated by one LED flashing in different patterns.
Bad battery
The charger can detect a weak or damaged
battery. The LED flashes in the pattern indi-
cated on the label. If you see this bad battery
blink pattern, do not continue to charge the battery. Return it
to a service center or a collection site for ecycling.
Hot/cold pack delay
When the charger detects a battery that
is excessively hot or excessively cold, it
automatically starts a Hot/Cold Pack Delay, suspending charg-
ing until the battery has normalized. After this happens, the
charger automatically switches to the Pack Charging mode.
This feature ensures maximum battery life.
The light flashes in the pattern indicated on the label.
Leaving the battery in the charger
The charger and battery pack can be left connected with
the LED glowing indefinitely. The charger will keep the
battery pack fresh and fully charged. This charger features
an automatic tune-up mode which equals or balances the
individual cells in the battery pack to allow it to function at
peak capacity. Battery packs should be tuned up weekly or
whenever the battery no longer delivers the same amount
of work. To use the automatic tune-up mode, place the
battery pack in the charger and leave it for at least 8 hours.
Important charging notes
u
Longest life and best performance can be obtained if
the battery pack is charged when the air temperature is
between 18 °C – 24 °C. DO NOT charge the battery pack
in an air temperature below +4.5 °C), or above +40 °C.
This is important and will prevent serious damage to the
battery pack.
u
The charger and battery pack may become warm to the
touch while charging. This is a normal condition, and
does not indicate a problem. To facilitate the cooling of
the battery pack after use, avoid placing the charger or
battery pack in a warm environment such as in a metal
shed or an uninsulated trailer.
u
If the battery pack does not charge properly:
u
Check operation of receptacle by plugging in a lamp
or other appliance;
u
Check to see if receptacle is connected to a light
switch which turns power off when you turn out
the lights;
u
Move the charger and battery pack to a location
where the surrounding air temperature is
approximately 18 °C – 24 °C;
u
If charging problems persist, take the tool, battery
pack and charger to your local service center.
u
The battery pack should be recharged when it fails to
produce sufficient power on jobs which were easily
done previously. DO NOT CONTINUE to use under these
conditions. Follow the charging procedure. You may also
charge a partially used pack whenever you desire with no
adverse effect on the battery pack.
u
Foreign materials of a conductive nature such as, but
not limited to, grinding dust, metal chips, steel wool,
aluminum foil, or any buildup of metallic particles
should be kept away from charger cavities. Unplug the
charger before attempting to clean.