Black+Decker OR070D-B5, Оригинальное руководство пользователя

Страница: 5 / 20

5
ENGLISH
(Original instructions)
• Always use the radiator in an upright position.
• Do not use the appliance in rooms less than 4m2 area.
• To disconnect the appliance, switch it “OFF” then remove
the plug from outlet. Do not pull out the cord because this
could damage it.
• The temperature of accessible surfaces may be high
during use and for some time afterwards.
Warning ! This radiator is not equipped with a device to control
the room temperature. Do not use this radiator in small rooms
when they are occupied by persons not capable of leaving the
room on their own, unless constant supervision is provided.
• Always leave sufficient space around the radiator for
ventilation.
Safety of others
• This appliance is not intended for use by persons
(including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction
concerning use of the appliance by a person responsible
for their safety.
• Children should be supervised to ensure that they do not
play with the appliance.
• Do not allow children or any person unfamiliar with these
instructions to use the appliance.
• Do not allow children or animals to come near the work
area or to touch the appliance or power supply cord.
• Close supervision is necessary when the appliance is
used near children.
• Children should be kept away unless continuously
supervised.
Caution ! Some parts of this product can become very hot and
cause burns. Particular attention has to be given where
children and vulnerable people are present.
After use
• Remove the plug from the socket before leaving the
appliance unattended and before changing, cleaning or
inspecting any parts of the appliance.
• When not in use, the appliance should be stored in a dry
place. Children should not have access to stored
appliances.
Inspection and repairs
• Switch off the appliance before cleaning, changing
accessories or approaching parts which move in use.
• Before use, check the appliance for damaged or defective
parts. Check for breakage of parts, damage to switches
and any other conditions that may affect its operation.
• Do not use the appliance if any part is damaged or
defective.
• Have any damaged or defective parts repaired or replaced
by an authorised repair agent.
• Before use, check the power supply cord for signs of
damage, ageing and wear.
• Do not use the appliance if the power supply cord or mains
plug is damaged or defective.
• If the power supply cord or mains plug is damaged or
defective it must be repaired by an authorised repair agent
in order to avoid a hazard. Do not cut the power supply
cord and do not attempt to repair it yourself.
• Never attempt to remove or replace any parts other than
those specified in this manual.
• This heater is filled with a precise quantity of special oil.
Repairs requiring opening of oil-container are only to be
made by the manufacturer or his service agent who should
be contacted if there is an oil leak. When scrapping the
heater, follow the regulations concerning the disposal of oil.
Electrical safety
Before use, check that the mains voltage corresponds to the
voltage on the rating plate.
This product must be earthed. Always check
that the mains voltage corresponds to the
voltage on the rating plate
• Appliance plugs must match the outlet. Never modify the
plug in any way.
• Do not use any adapter plugs with earthed (Class 1)
appliances. Unmodified plugs and matching outlets will
reduce the risk of electric shock.
• To avoid the risk of electric shock, do not immerse the
cord, plug or appliance in water or other liquid.
Labels on Appliance
The following pictograms along with the date code are shown
on the tool:
Warning ! Hot surface.
Warning ! In order to avoid overheating, do not
cover the radiator.
Features
1. Fin
2. Air outlet
3. Rear castor assembly
4. Front castor assembly
5. Cord wrap
6. Power switch
7. Thermostat switch
8. Power indicator light