3
• Do not incinerate the appliance even if it is severely damaged. The batteries can
explode in a fire.
• This appliance is intended for household use only and not for commercial or industrial
use.
• Shock Hazard. To protect against risk of electrical shock, do not put unit or charging
base in water or other liquid.
• Do not allow the cord to hang over the edge of a table or counter or touch hot surfaces.
The unit should be placed or mounted away from sinks and hot surfaces.
• Plug the charger directly into an electrical outlet.
• Use the charger only in a standard electrical outlet (120V/60Hz).
• Unplug the charger from outlet before any routine cleaning or maintenance.
• This product includes rechargeable lithium-ion batteries. Do not incinerate batteries as
they will explode at high temperatures.
• Do not look into the air vents when the unit is switched on, as sometimes
there is a possibility of small debris being discharged from the air vents, especially
after cleaning / replacement of the filters as debris inside the unit can be disturbed.
ADDITIONAL SAFETY WARNINGS
a) Prevent unintentional starting. Ensure the switch is in the off-position before
connecting to battery pack, picking up or carrying the appliance.
Carrying
the appliance with your finger on the switch or energizing appliance that have the
switch on invites accidents.
b) Recharge only with the charger specified by the manufacturer.
A charger that
is suitable for one type of battery pack may create a risk of fire when used with
another battery pack.
c) Under abusive conditions, liquid may be ejected from the battery; avoid
contact. If contact accidentally occurs, flush with water. If liquid contacts eyes,
additionally seek medical help.
Liquid ejected from the battery may cause irritation
or burns.
d) Do not use a battery pack or appliance that is damaged or modified.
Damaged
or modified batteries may exhibit unpredictable behavior resulting in fire, explosion
or risk of injury.
e) Do not expose a battery pack or appliance to fire or excessive temperature.
Exposure to fire or temperature above 266°F (130°C) may cause explosion.
f) Have servicing performed by a qualified repair person using only identical
replacement parts.
This will ensure that the safety of the product is maintained.
WARNING:
Do not attempt to modify or repair the appliance
Symbols
• The label on your tool may include the following symbols. The symbols and their
definitions are as follows:
V ..................volts A ...................amperes
Hz ................hertz W ..................watts
min ..............minutes
or AC .......alternating current
or DC ..direct current
no .................no load speed
................Class I Construction
..................earthing terminal
(grounded)
.................safety alert symbol
................Class II Construction
.../min or rpm..revolutions or reciprocation
(double insulated)
per minute
Wh ..........................Watt Hours
SAVE THESE INSTRUCTIONS
