7
If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a
similarly qualified person in order to avoid a hazard.
IMPORTANT!
Remove the plug from the socket before performing maintenance. Before using the machine make
sure that the frequency and voltage shown on the rating plate correspond with the mains voltage.
Specifications and details are subject to change without prior notice. The accessories shown in the
pictures may vary from model to model.
IMPORTANT SAFEGUARDS
The symbol on the product or packaging indicates that the product must not be treated as domestic
refuse. Instead, it should be handed in to a collection point for the recycling of electrical and electronic
components. By ensuring the product is treated in the correct manner, you will help prevent any
negative impact on the environment and health that might arise were the product to be discarded as
ordinary refuse. For further information about recycling, you should contact your local authorities,
refuse collection service or the sales outlet where you bought the goods.
WARNING!
20. Do not pick up soot, cement, plaster or drywall dust without filter and dust bag in
place. These are very fine particles that may affect the performance of the motor or
be exhausted back into the air. Additional dust bags are available.
21. Do not leave the cord lying on the floor once you have finished the cleaning job. It
can become a tripping hazard.
22. Use special care when emptying heavily loaded tanks.
23. To avoid spontaneous combustion, empty tank after each use.
24. The operation of a utility vacuum can result in foreign objects being blown into eyes,
which can result in eye damage. Always wear safety goggles when operating
vacuum.
25. This appliance is provided with double insulation. Use only identical replacement
parts. See instructions for servicing double insulated appliances.
26. Unplug before connecting the hose, nozzles, filters, or other accessories.
NOTE:
Use only as described in this manual. Use only manufacturer's recommended
attachments.
SERVICING OF DOUBLE-INSULATED WET/DRY VAC
In a double-insulated Wet/Dry Vac, two systems of insulation are provided instead of
grounding. No grounding means is provided on a double-insulated appliance, nor should
a means for grounding be added. Servicing a double-insulated Wet/Dry Vac requires
extreme care and knowledge of the system and should be done only by qualified service
personnel. Replacement parts for a double-insulated Wet/Dry Vac must be identical to the
parts they replace. Your double-insulated Wet/Dry Vac is marked with the words "DOUBLE
INSULATED" and the symbol (square within a square) may also be marked on the appliance.
To reduce the risk of injury from electrical shock, unplug power cord before servicing the
electrical parts of the Wet/Dry Vac.
IMPORTANT!
If the supply cord is damaged, it must be replaced by the manufacturer or its service agent
or a similarly qualified person in order to avoid a hazard.
IMPORTANT!
Remove the plug from the socket before performing maintenance. Before using the machine
make sure that the frequency and voltage shown on the rating plate correspond with the
mains voltage. Specifications and details are subject to change without prior notice.
The accessories shown in the pictures may vary from model to model.
IMPORTANT SAFEGUARDS
The symbol on the product or packaging indicates that the product must not be treated as
domestic refuse. Instead, it should be handed in to a collection point for the recycling of
electrical and electronic components. By ensuring the product is treated in the correct
manner, you will help prevent any negative impact on the environment and health that
might arise were the product to be discarded as ordinary refuse. For further information
about recycling, you should contact your local authorities, refuse collection service or the
sales outlet where you bought the goods.
To reduce the risk of injury from electrical shock:
1. This appliance has a polarized plug (one blade is wider than the other). This plug will fit
in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the
plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do
not change the plug in any way.
2. Unplug power cord before servicing the electrical parts of the Wet/Dry Vac.
IMPORTANT!
If the supply cord is damaged, it must be replaced by the manufacturer or its service agent
or a similarly qualified person in order to avoid a hazard.
IMPORTANT!
Remove the plug from the socket before performing maintenance. Before using the machine
make sure that the frequency and voltage shown on the rating plate correspond with the
mains voltage. Specifications and details are subject to change without prior notice.
The accessories shown in the pictures may vary from model to model.
