PW2750 Hot Water Pressure Washer Manual
3
RECOGNIZE SAFETY SYMBOLS, WORDS AND LABELS
What You Need to Know About Safety Instructions
Warning and Important Safety Instructions appearing in this manual are not meant to cover all possible conditions and
situations that may occur. Common sense, caution and care must be exercised when operating or cleaning tools and
equipment.
Always contact your dealer, distributor, service agent or manufacturer about problems or conditions you do not understand.
This is the safety alert symbol. It is used to alert you to potential
personal injury hazards. Obey all safety messages that follow this
symbol to avoid possible injury or death.
DANGER indicates an imminently hazardous situation
which, if not avoided, will result in death or serious injury.
WARNING indicates a potentially hazardous situation which,
if not avoided, could result in death or serious injury.
CAUTION indicates a potentially hazardous situation which,
if not avoided, may result in minor or moderate injury.
CAUTION used without the safety alert symbol indicates a
potentially hazardous situation which, if not avoided, may
result in property damage.
Chemicals:
According to the State of California, the exhaust from this tool contains chemicals known to cause cancer,
birth defects, or other reproductive harm.
High Temperatures:
This tool produces heat when in operation. Temperatures near the exhaust can exceed 150 Degrees
Fahrenheit (65 Degrees Celsius).
• Do not touch hot surfaces. Observe all warning placards on this tool denoting hot surfaces.
• Allow this tool to cool for several minutes after use before touching the engine, muffler or other areas that are hot during operation
and before storing indoors.
• Hot exhaust may ignite some materials. Keep flammable materials away from this tool.
• Keep at least several feet of clearance on all sides of this tool during operation. Do not enclose this tool in any structure.
Usage:
Misuse of this tool can damage it or shorten its life.
• Use this tool only for its intended purpose.
• Operate this tool only on a dry, level surface.
• Allow this tool to run for several minutes before connecting any electrical devices.
• Promptly turn off any malfunctioning devices and disconnect them.
• Do not operate an excessive number of electrical devices in excess of the wattage capacity of this tool.
• Do not turn on electrical devices until after they are connected to this tool.
• Turn off all connected electrical devices before stopping this tool.
