Black Box WRT750A Скачать руководство пользователя страница 100

Страница: 100 / 120

877-877-2269 | blackbox.com

Page 100

Chapter 5: Configuring the Router

• IPv6 Address—The IPv6 address assigned by your ISP dynamically.

• Prefix Length—The length of IPv6 address prefix.

• IPv6 Gateway—Enter the default gateway provided by your ISP.

• Addressing Type—There are two types of assignments for the IPv6 address: SLAAC (Stateless address auto-configuration) and

DHCPv6 (Dynamic Host Configuration Protocol for IPv6) Server.

• MTU(Bytes)—The normal MTU (Maximum Transmission Unit) value for most Ethernet networks is 1500 Bytes. For some ISPs,

you may need to modify the MTU. But this is rarely required, and should not be done unless you are sure it is necessary for your
ISP connection.

If your ISP gives you one or two DNS IPv6 addresses, select Set IPv6 DNS Server manually and enter the IPv6 DNS Server and
Secondary IPv6 DNS Server into the correct fields. Otherwise, the DNS servers will be assigned from the ISP dynamically.

• Enable MLD Proxy—Enable the Multicast Listener Discovery (MLD) Proxy function if you need it.

• IPv6 DNS Server—Enter the DNS IPv6 address provided by your ISP.

• Secondary IPv6 DNS Server—Enter another DNS IPv6 address provided by your ISP.

NOTE: If you get an Address not found error when you access a Web site, your DNS servers might not be set up properly. Contact

your ISP to get DNS server addresses.

2. Static IPv6

Figure 5-110. Static IPv6.

• IPv6 Address—Enter the IPv6 address provided by your ISP.

• Prefix Length—The length of IPv6 address prefix.

• IPv6 Gateway—Enter the default gateway provided by your ISP.

• IPv6 DNS Server—Enter the DNS IPv6 address provided by your ISP.

• Secondary IPv6 DNS Server—Enter another DNS IPv6 address provided by your ISP.

• MTU (Bytes)—The normal MTU (Maximum Transmission Unit) value for most Ethernet networks is 1500 Bytes. For some ISPs,

you may need to modify the MTU. But this is rarely required, and should not be done unless you are sure it is necessary for your
ISP connection.

Содержание WRT750A

























































































































Результаты поиска

Содержание WRT750A

Отзывы:

Похожие инструкции для WRT750A

Бренды по названию

Популярные бренды

Black Box WRT750A, Руководство пользователя

Результаты поиска

Содержание WRT750A

Отзывы:

Похожие инструкции для WRT750A

Бренды по названию

Популярные бренды