Black Box VSC-HDMI-SDI, Руководство пользователя

Страница: 13 / 16

724-746-5500 | blackbox.com Page 13
Chapter 4: EDID Learning
4. EDID Learning
1. Make sure that Pin #1 and Pin #2 of the DIP switch are both set to ON.
2. Connect the HDMI display to the HDMI port of TX.
3. Power on TX.
4. After LED turns to light, the EDID Learning procedure is completed.
CAUTION: DO NOT change the DIP switch after the EDID has been learned;
otherwise, the built-in EDID Learning information will be lost and will
need to be learned again.