Black Box TS560A, Руководство пользователя

Страница: 47 / 67

44
LAN SOLUTION NETWORK TESTER
Each of the four decimal numbers (values between
0–255) separated by periods represents one
hexadecimal byte of the four-byte IP address. Each digit
in the decimal number can only be set to a value valid
for that position. Thus, the high-order (leftmost) digit in
any of the decimal numbers can be set to 0, 1, or 2. In
addition, each digit can only be set to a valid value in
relation to the low-order digits in that number. The
high-order digit can only be set to 2 if the low-order
digits are less than 55. You may have to enter the desired
IP address from right to left to allow the low-order digits
to be set before the high-order digit. Any IP addresses
can be entered for a target, either on or off the LAN
segment; even “reserved” IP addresses can be entered.
To exit this sub-menu, press SEL (this takes the tester
back to the sub-menu title screen), or press CABLE or
NTWRK to enter a test mode. Exiting this menu will
leave the displayed target as the active one.
5.2 PING Setup
This is the sub-menu title screen for configuring the IP
address configuration for the DHCP Off (Manual) PING
test mode. The settings of these values interact with each
other to force the router IP address to be accessible on