Black Box TS560A, Руководство пользователя

Страница: 23 / 67

20
LAN SOLUTION NETWORK TESTER
2. Press the NTWRK button until Validate Link is
displayed. Press the SEL button to activate the test.
3. To get to Setup mode, press the SETUP button. In
Setup, set the PING Generator to DHCP Off (see
Section 3.8 ). A specific manual address does not
need to be set. The PING Generator will recognize
the Validator and assign addressing.
4. Connect the PING Generator to the other end of
the link.
5. On the PING Generator, press the NTWRK button
until PING Test is displayed. Press the SEL button
to begin.
6. The target or router acronym will change to Val
on the PING Generator when the Validator is
found and addressing has been assigned. The
PING Generator operates and accumulates
information like a normal PING test. The
Validator displays only the packet count on its
screen.