Black Box TS560A, Руководство пользователя

Страница: 45 / 67

42
LAN SOLUTION NETWORK TESTER
5. Setup Mode
Use the Setup mode to set user-selectable options and
present information that’s helpful to the user. Enter
Setup mode by pressing the center of the
CABLE/NTWRK buttons (labeled “SETUP”), which
activates both buttons simultaneously. The estimated
battery life remaining is displayed briefly when entering
Setup mode. Scroll through the main menu by using the
up/down arrow buttons. There are several sub-menus
that are accessed by pressing the SEL button when the
sub-menu title is displayed. These are discussed in
Sections 5.1 through 5.6 .
5.1 Target Setup
In the PING protocol, an IP address must be selected to
receive an echo request. This address is the “target”
address for that PING. While using the LAN Solution
Network Tester, you must select a target manually in
Setup mode. This target can be on the LAN, or
anywhere else accessible through a router connected to
the LAN. If the target is not on the LAN, the router IP
address must be known so that the PING can be sent to
the router, which forwards it to the ultimate location.