50
SERVSWITCH™ WIZARD MP
5. The upgrade program will now rewrite the Wizard MP’s existing firmware
code with the code in the MPxyz.HEX file. When the upgrade is complete,
the upgrade program will either respond with an error message if the
upgrade has failed (if it was interrupted by a power failure, for example), or it
will confirm that the upgrade has been successful and then terminate.
Do another warm reset on the Wizard MP. If the upgrade was successful,
this will return the Wizard MP to normal operation. If the upgrade failed, the
Wizard MP will detect the problem and boot into upgrade mode so that you
can run the upgrade program again. (The code that the Wizard MP uses to
download new firmware is not itself affected by the upgrade process.)
6. Verify that the upgrade has been successful by having the Wizard MP indicate
its new firmware revision as described in
Section 4.2.9
.