32
SERVSWITCH™ WIZARD MP
4.2.9 V
IEWING THE
F
IRMWARE
R
EVISION
, R
ESTORING
M
OUSE
F
UNCTION
,
OR
R
ESETTING TO
F
ACTORY
D
EFAULTS
For technical-support purposes, it might be necessary to find out the firmware-
release version of the control software in your ServSwitch Wizard MP. Before
calling Black Box Tech Support about a problem, you can use the [F][1], [F][2],
and [F][3] commands to retrieve this; each of these commands causes the Wizard
MP to briefly show one of the digits of the firmware’s version number on its front-
panel display. For example, if the Wizard MP responds to [F][1][Enter] with the
digit “1”, to [F][2][Enter] with the digit “0”, and to [F][3][Enter] with the digit
“2”, your Wizard MP is using firmware version 1.02.
You can also restore the function of previously disconnected PS/2 type CPU
mouse ports with the [F][5] and [F][6] commands (see
Section 5.9
) and you can
reset all of the Wizard MP’s configuration options to their factory-default states
with [F][8].
Keep in mind that [F][1], [F][2], and so on refer to the letter [F] followed by
the number key,
not
the function keys [F1], [F2], etc.
F1
Display first digit of firmware-version number
F2
Display second digit of firmware-version number
F3
Display third digit of firmware-version number
F4
(Reserved for future use)
F5
Restore PS/2 mouse function to the currently selected CPU’s mouse port
F6
Restore IntelliMouse function to the currently selected CPU’s mouse port
F7
(Reserved for future use)
F8
Reset all configuration options to their factory-default settings (the Wizard
MP will briefly show the letter “r” on its front-panel display to indicate that
this has been completed)
