background image

FCC and IC RFI Statements

724-746-5500   |   blackbox.com 

Page 3

Federal Communications Commission and Industry Canada Radio Frequency Interference 
Statements 

This equipment generates, uses, and can radiate radio-frequency energy, and if not installed and used properly, that is, in strict 
accordance with the manufacturer’s instructions, may cause inter ference to radio communication. It has been tested and found to 
comply with the limits for a Class A computing device in accordance with the specifications in Subpart B of Part 15 of FCC rules, 
which are designed to provide reasonable protection against such interference when the equipment is operated in a commercial 
environment. Operation of this equipment in a residential area is likely to cause interference, in which case the user at his own 
expense will be required to take whatever measures may be necessary to correct the interference.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to 
operate the equipment.

This digital apparatus does not exceed the Class A limits for radio noise emis sion from digital apparatus set out in the Radio 
Interference Regulation of Industry Canada.

Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limites applicables aux appareils numériques de 
la classe A prescrites dans le Règlement sur le brouillage radioélectrique publié par Industrie Canada.

Содержание ServSwitch KV0004A












































Отзывы: