Black Box ServSwitch Duo KV6EXT-R2, Руководство пользователя

Страница: 22 / 53

21
CHAPTER 4: Configuration
4. Configuration
To configure your ServSwitch™ Duo Extender system, first you’ll need to
configure any attached PC (if the Extender is a KV6EXT-R2), as directed in
Section 4.1 . Then you’ll need to configure the Extender itself, as directed in the
rest of this chapter.
IMPORTANT NOTES
Before you operate the Extender for the first time, you must fine-tune its
video-compensation amplifiers—the picture will look awful unless you
do. See
Section 4.2.2.A .
Throughout the rest of this manual, the [Enter] designation refers to
the main “enter” or “carriage-return” key (often labeled “
↵
”) on the main
section of the keyboard. Do not use the “Enter” key on the numeric
keypad or the extra “Enter” key found on the main section of some
specialized keyboards.
4.1 Configuring an Attached PC (KV6EXT-R2 Only)
If you’ve attached a PC to the full KV6EXT-R2 Extender, configure it in the same
way that you would if your keyboard, mouse, and monitor were all connected
directly to it, but keep these things in mind:
• The Extender emulates Microsoft compatible serial, IntelliMouse, and PS/2
mice, so make sure that your PC software is configured for a Microsoft mouse
of the correct type. Refer to the list of supported drivers in
Section 3.1 .
• The Extender supports VGA, SVGA, XGA, and XGA-2 type monitors, but does
not support the automatic detection features available with some Plug-and-Play
monitors and video cards. If you have this type of video card or monitor, you
should select the video mode manually instead of relying on the automatic
detection feature.