Black Box ServSwitch Duo KV6EXT-R2, Руководство пользователя

Страница: 18 / 53

17
CHAPTER 3: Installation
3.3 Connecting Your Devices
First make sure the power supply is unplugged and disconnected from the
ServSwitch Duo Extender.
Also make sure that (if possible) all of the devices you want to attach to your
Extender system are turned off and unplugged. (If you have to “hot-plug” a
powered computer into the Extender, see
Section 5.9 .) You don’t have to connect
anything to ports on the Extender that you’re not using. Do not attach anything to
the Extender’s serial or audio connectors; these might be used in some future
implementation of the Extender, but they have no function in the current version.
3.3.1 C
ONNECTING
U
SER
E
QUIPMENT
Plug a set of shared user equipment (keyboard, PS/2 mouse, and monitor) into
the connectors on the Extender marked with the corresponding icons in the
“CONTROL STATION” connector group on the Unit’s front panel. Refer to
Figure 3-1 on the next page.
3.3.2 C
ONNECTING A
L
OCAL
CPU (O
PTIONAL
, KV6EXT-R2 O
NLY
)
To attach an optional local computer to the KV6EXT-R2 Extender, run extension
cabling from the CPU’s keyboard, video, and mouse ports to the connectors on the
Extender marked with the corresponding icons in the “LOCAL COMPUTER”
group on the Unit’s rear panel. (The type of cabling you’ll use is discussed in the
bulleted paragraph at the top of the previous page.) Refer to Figure 3-1 on the
next page.