31
CHAPTER 6: Installation
8. Make sure the remote serial device functions. You might need to load a driver
or run an application in order for the CPU to be able to detect and handle
the serial data.
If everything works in your test setup, repeat the procedures in
Section 6.2
and
6.3
for your actual installation. (For information about rackmounting a Remote Unit,
see
Appendix B
.) If everything works in the actual installation, you can proceed to
adjust the remote site’s video (see
Section 6.4
). For pictures of complete
installations, see Figures 6-6 and 6-7 below and Figure 6-8 on the next page.
Figure 6-6. An Extender-system installation, front view.
Figure 6-7. A Single-Access Extender-system installation, rear view.
Remote monitor, keyboard, mouse,
speakers, and modem (serial cable
to modem is not included)
Remote touchscreen monitor, keyboard,
mouse, microphone, and headphones
Local monitor,
keyboard, and
mouse (Dual-
Access model only)
Remote
Unit
Remote
Unit
Local
Unit
Local
Unit
PC CPU (extension cables
to CPU included)
PC CPU
Extension
cables
(included)
CAT5 interconnect cable
CAT5 interconnect cable
Power
supply
Power
supply