21
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.877.2269
1.877.877.2269
BLACKBOX.COM
3.3 DOOR HINGE SIDE CHANGE INSTRUCTIONS
3.3.1 TOOLS LIST
Phillips Screwdriver
10MM (OR 7/16”) WRENCH
3.3.2 INSTRUCTIONS
STEP 1
: Use the screwdriver to remove the FOUR (4) M3 X 0.5MM X 6MM FLAT HEAD PHILLIPS MACHINE SCREWS holding on the
side lock. The lock must be lifted forward as if to open cabinet to access these screws. Once screws are removed, remove the side
lock from the cabinet.
STEP 2
: Use the screwdriver to remove the TWO (2) M3 X 0.5MM X 6MM FLAT HEAD PHILLIPS MACHINE SCREWS holding the
side lock latch onto the front door and remove the side latch.
STEP 3
: Remove the FOUR (4) (for RMT351A, RMT352A-R3, and RMT353A-R3) or SIX (6) (for RMT351LA, RMT352LA, and
RMT353LA) M6 X 1MM X 12MM PAN HEAD PHILLIPS MACHINE SCREWS holding the side hinge onto the front door of the low
profile wallmount cabinet using the screwdriver. If necessary, use the 10MM wrench to hold the M6 X 1MM FLANGE NUTS in place
while removing these screws.
STEP 4
: Remove the remaining the FOUR (4) (for RMT351A, RMT352A-R3, and RMT353A-R3) or SIX (6) (for RMT351LA,
RMT352LA, and RMT353LA) M6 X 1MM X 12MM PAN HEAD PHILLIPS MACHINE SCREWS holding the side hinge to the main
cabinet body in the same way.
STEP 5
: Position side hinge on the other side of the cabinet so that the front door will open in the other direction. Make sure that
hinge is positioned in the correct orientation so that all mounting holes align.
STEP 6
: Attach the hinge to the main cabinet body using FOUR (4) (for RMT351A, RMT352A-R3, and RMT353A-R3) or SIX (6)
(for RMT351LA, RMT352LA, and RMT353LA) M6 X 1MM X 12MM PAN HEAD PHILLIPS MACHINE SCREWS and FOUR (4) (for
RMT351A, RMT352A-R3, and RMT353A-R3) or SIX (6) (for RMT351LA, RMT352LA, and RMT353LA) M6 X 1MM FLANGE NUTS. If
necessary, use the 10MM wrench to hold the M6 X 1MM FLANGE NUTS in place while tightening. Make sure all screws are tight
before attaching the front door to the hinge.
STEP 7
: Attach the front door of the low profile wallmount cabinet to the side hinge using FOUR (4) (for RMT351A, RMT352A-R3,
and RMT353A-R3) or SIX (6) (for RMT351LA, RMT352LA, and RMT353LA) M6 X 1MM X 12MM PAN HEAD PHILLIPS MACHINE
SCREWS and FOUR (4) (for RMT351A, RMT352A-R3, and RMT353A-R3) or SIX (6) (for RMT351LA, RMT352LA, and RMT353LA) M6
X 1MM FLANGE NUTS using the same method as step (6).
STEP 8
: Attach the side lock latch to the side of the front door opposite the hinge using TWO (2) M3 X 0.5MM X 6MM FLAT HEAD
PHILLIPS MACHINE SCREWS and TWO (2) M3 X 0.5MM LOCKNUTS WITH EXTERNAL-TOOTH LOCK WASHERS. Make sure screws
are tight.
STEP 9
: Attach the side lock to the main low profile wallmount cabinet body using FOUR (4) M3 X 0.5MM X 6MM FLAT HEAD
PHILLIPS MACHINE SCREWS and FOUR (4) M3 X 0.5MM LOCKNUTS WITH EXTERNAL-TOOTH LOCK WASHERS. It may be helpful
to use needle-nose pliers to hold locknuts in place while tightening the screws
STEP 10
: Hinge switch is complete. Close and lock cabinet to make sure the side lock and side lock latch align correctly.
CHAPTER 3: INSTALLATION
