Black Box RMT351A, Руководство пользователя

Страница: 20 / 28

20
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.877.2269
1.877.877.2269 BLACKBOX.COM
CHAPTER 3: INSTALLATION
3.2 INSIDE MOUNTING BRACKET ADJUSTMENT INSTRUCTIONS
3.2.1 TOOLS LIST
Š
Š
7/16” Wrench
3.2.2 INSTRUCTIONS
STEP 1 : Use the 7/16” wrench to remove the TWO (2) ¼”-20 FLANGE NUTS holding on the SQUARE HOLE MOUNTING BRACKET
STEP 2 : Remove SQUARE HOLE MOUNTING BRACKET and TWO (2) ¼”-20 X ½” SQUARE NECK CARRIAGE BOLTS from the inside
mounting bracket in the low profile wallmount cabinet
STEP 3 : Locate the square mounting holes at the desired mounting height and place the TWO (2) ¼”-20 X ½” SQUARE NECK
CARRIAGE BOLTS in these holes. Carriage bolts should be facing in, with the heads on the outside of the mounting brackets
STEP 4 : Place SQUARE HOLE MOUNTING BRACKET on these TWO (2) ¼”-20 X ½” SQUARE NECK CARRIAGE BOLTS and secure
with the TWO (2) ¼”-20 FLANGE NUTS. Tighten the ¼”-20 FLANGE NUTS with the 7/16” wrench
STEP 5 : Repeat steps (1) – (4) to adjust the height of the second SQUARE HOLE MOUNTING BRACKET. Make sure that SQUARE
HOLE MOUNTING BRACKETS are at the same height.
FIGURE 3-2. ADJUSTING THE INSIDE MOUNTING BRACKETS ON THE RMT351A
NOTE: Instructions for adjusting the inside mounting brackets are the same for all models.