
RGB/EGA/CGA/MDA TO DVI(/VGA) CONVERTER
36
5. Monitor Setup
This procedure is designed to correct for discrepancies in the video signal due to
analogue/digital video conversion by the Monitor. You do not need to follow this procedure if
you have:
•
A CRT monitor connected to the RGB to DVI(/VGA) Converter through the VGA input
•
A TFT monitor connected to the RGB to DVI(/VGA) Converter through the DVI input
In these cases, there is no need to adjust the monitor because the video format is not
converted.
Please make sure that you carry out this procedure before setting up the RGB to DVI(/VGA)
Converter (page 37). If you are using a TFT monitor at the RGB to DVI(/VGA) Converter
with a VGA cable, the TFT monitor digitizes the video data stream and this may affect video
quality. By setting up the TFT monitor first, you ensure that you are correcting discrepancies
due solely to the RGB to DVI(/VGA) Converter system in the RGB to DVI(/VGA) Converter
Setup procedure.
15.
Connect the RGB to DVI(/VGA) Converter system and display the regular desktop in
the desired screen resolution. Monitor Setup may vary depending on screen resolution
and/or refresh rate.
16.
Display the OSD utility (see page 26).
17.
Select the Tools menu option (see page 33).
18.
Select the ‘burst’ pattern option. Your TFT should show fine, 1 pixel wide, black and
white vertical stripes over the entire screen. The OSD will stay visible in the middle of
the screen.
19.
Depending on the type of TFT, press the ‘AUTO’ Button on the monitor control panel or
select
Auto Adjust
in the TFT Setup Menu. Refer to the manual supplied with your
monitor for more information.
20.
If the vertical stripes are sharp and without jitter or smearing, the adjustment has been
successful. Go to step 8.
21.
If the picture quality is not acceptable after the automatic adjustment, you will have to
manually adjust the pixel clock and pixel phase (in this order). Please follow the
instructions in your monitor’s user manual.
22.
Press any key to exit the test pattern display.
23.
Exit the OSD.
Содержание RGB/EGA/CGA/MDA to DVI(/VGA) Converter
Страница 1: ...ACU315A R2 RGB EGA CGA MDA to DVI VGA Converter Manual http www blackbox com...
Страница 4: ...RGB EGA CGA MDA TO DVI VGA CONVERTER 4...
Страница 46: ...RGB EGA CGA MDA TO DVI VGA CONVERTER 46 The kit allows you to mount a different count of devices 1 4 devices...
Страница 57: ...NOTES...