
15
3.4 Up-Link Option on Port #5,
Up-Link Switch
For RJ-45 port #5 only, the Up-Link
crossover switch on the right side of
the MiniHub is used to select either
a normal 10BASE-T wiring segment
connection to a user device (switch
in the “=” position) or a special
network up-link 10BASE-T wiring
segment connection to another hub
or concentrator (switch in the “X”
position). A special crossover cable
for up-links is not needed with the
MiniHub because of the built-in up-
link switch feature.
Fig. 3-6. Up-Link Option on Port #5.
10BASE-T
12V
#AUI
PARALLEL PARALLEL
Personal MiniHub
1
2
3
4
1RX
LINK
PORT
PORT 5
PWR
RX
LINK
UP LINK
CHAPTER 3: Installation