
12
PERSONAL MINIHUB
3.1 Table-Top or Shelf Mounting
The Personal MiniHub is easily
mounted on a table-top or shelf,
and has four rubber feet to provide
stability and keep it from scratching
finished surfaces. A piece of Velcro
may be used to add additional
stability if desired. When properly
installed, the LED status indicators
will be in plain view and easy to read.
Plug in two or more Ethernet cable
segments, and your network is in
operation.
The rugged steel case of the
Personal MiniHub will protect it
from accidental damage in an office
or lab setting. Keep an open area
around the unit so that convection
cooling can occur while the unit is
in operation.
3.2 Wall (or Vertical Surface)
Mounting
A piece of Velcro mounting tape
is supplied with the unit, and may
be used to mount a MiniHub in a
vertical position. Stick one side of
the Velcro on the bottom of the
MiniHub between the rubber feet.
Stick the other side of the Velcro
to the desired vertical mounting
location. This permits the compact
hub to be mounted on a wall
surface, on the side of a server unit
cabinet, on the back of a desk, or in
other similar convenient locations in
the workplace where the associated
cables are out of the way.
10BASE-T
12V
#AUI
PARALLEL PARALLEL
Personal MiniHub
1
2
3
4
1RX
LINK
PORT
PORT 5
PWR
RX
LINK
UP LINK
Fig. 3-3. Personal MiniHub, Velcro Mounting.