24
MULTIPORT CSU/DSU
Display Hardware Configuration
Select “Display Hardware Configuration” from the Main Menu to display the
configuration of hardware Switches S1, S2, and S3. See
Section 3.1
to review the
DIP switch definitions.
Figure 3-21. Display Hardware Configuration Screen.
Hardware Configuration (Display Only)
Line Rate
56 kbps
Rate adapter
19.2 kbps
Transmit Clock Source
Network
Data Format
Asynchronous
Character Length
10 Bits
Extended Signal Rate
Normal
RTS/CTS Delay
Extended
Forced RTS
Off
Anti-Stream Timer
On
DSR Loop Status
On
Circuit Assurance
On
Front Panel Switches
Enabled
Response to Remote Loop
Enabled
DTE Loop Request
Disabled
Test Pattern
2047
Control Port Speed
19.2 kbps
Exit = [ESC]
c
