73
CHAPTER 7: Callback Security
Command:
#CBF?
Callback Failed Attempts Display
Values:
n/a
Default:
n/a
Description:
Requests the number of failed callback passwords
since reset or power-up. This number can be stored
to nonvolatile memory using the &W command.
This command can be used only after the setup
password has been entered and callback security
enabled.
Command:
#CBFR
Callback Failed Attempts Reset
Values:
n/a
Default:
n/a
Description:
Resets the number of failed callback passwords to 0.
This does not reset the number stored in nonvolatile
memory. This command can be used only after the
setup password has been entered and callback
security enabled.
Command:
#CBIn
Local Callback Inactivity Timer
Values:
n = 1–255
Default:
20
Description:
Sets the time (in minutes) that the modem waits for
a command before forcing the user to enter the
setup password again. This command can be used
only after the setup password has been entered and
callback security has been enabled for local/remote
operation (#CBS1).
Command:
#CBNy=x
Store Callback Password
Values:
y = 0–29; x = password (6–10 characters)
Defaults:
None
Description:
Sets the callback security password for the y memory
location. The password must contain 6 to 10
characters, and cannot include the + or - characters.
This command can be used only after the setup
password has been entered and callback security
enabled.
