18
MINI-MODEM V.92
3.4.2 D
IAL
-U
P
C
ONNECTION
Plug one end of the modular telephone cable into the modem’s LINE jack, and
the other end into a standard telephone wall jack.
NOTE
• The LINE jack is not interchangeable with the PHONE jack. Do not plug
the telephone into the LINE jack or the line cable into the PHONE jack.
• Regulatory agencies may impose certain restrictions on equipment
connected to public telephone systems. For more information, see
pages 2–5.
3.4.3 T
WO
-W
IRE
L
EASED
-L
INE
C
ONNECTION
To use the Mini-Modem V.92 on a two-wire leased line, plug one end of a two-wire
telephone cable into the modem’s LINE jack. Connect the other end to a two-wire
leased-line wall jack or terminals.
NOTE
Before you can use the modem on a leased line, you must first change
the internal jumpers. See Section 3.3.
3.4.4 T
ELEPHONE
C
ONNECTION
If you want to connect a telephone to the same line as the modem, you can
optionally plug it into the modem’s PHONE jack.
NOTE
The PHONE jack is not interchangeable with the LINE jack. Do not plug
the telephone into the LINE jack or the line cable into the PHONE jack.
3.4.5 P
OWER
C
ONNECTION
The power switch is located on the right side of the modem. Make sure it is set
to OFF. Plug the the universal power supply into the PWR jack on the modem.
Then plug one end of the country-specific power-supply cord into the universal
power supply and the other end into a power outlet or power strip.
NOTE
Use only the power supply supplied with the modem. Use of any other
power supply voids the warranty and can damage the modem.