manualshive.com logo in svg

Black Box Mini-Modem V.92 MD1626A, Руководство пользователя

Поделиться
Скачать
Black Box Mini-Modem V.92 MD1626A Скачать руководство пользователя страница 17

16

MINI-MODEM V.92

CAUTION

The  circuit  board  can  be  harmed  by  static  electricity.  Before  you  open
the  case,  touch  a  grounded  object  (such  as  the  metal  chassis  of  your
computer)  to  discharge  any  static  electricity  in  your  body.  Then  touch
the metal shell of the modem’s RS-232 connector to ensure that there is
no voltage difference between you and the modem.

3.3.1 O

PENING THE

M

ODEM

1. If the modem is connected, turn it off and remove all connecting cables,

including the power and line cables.

2. Turn the modem upside down.

3. On the bottom of the modem are two screws, which hold the case together.

Remove both screws and set them aside.

4. Turn the modem right side up.

5. Remove the top part of the modem case.

6. To close the modem, reverse steps 1 through 5.

3.3.2 C

HANGING THE

D

IAL

-U

P

/L

EASED

-L

INE

J

UMPERS

As shipped from the factory, your modem is configured for normal dial-up
operation. That is, the modem must dial a phone number to connect to another
modem. To use the modem on a leased line, you must change jumper J10 to select
leased-line operation, and J11 to select whether it will be the originating or the
answering modem. (If dial-up operation is selected, J11 has no effect.) 
See Figure 3-2 for jumper locations and positions. See Chapter 4 for additional
information about leased lines.

• To use the modem on a leased line, move the J10 jumper plug from the

default dial-up position to the leased line position.

• To make the modem the originating modem on the leased line, move the J11

jumper plug to the originate position.

• To make the modem the answering modem on the leased line, leave the J11

jumper plug in the factory-default answer position.

Содержание Mini-Modem V.92 MD1626A











































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды