15
4.0 CONFIGURATION
The
ME0011A-vDSL
has four DIP switches for configuring the unit for a wide
variety of applications. This section describes switch locations and
explains
the different configurations.
4.1 CONFIGURING THE HARDWARE DIP SWITCHES
Using a small flat-tip screwdriver, remove the protective cover located on
the underside of the
ME0011A-vDSL
.
Figure 10.
Removing protective cover
Figure 11 and Figure 12 on page 16 show the orientation of the DIP
switches in the On and Off positions.
VLINK Modem
Po
we
r
Link
QOL
Link
Activity
VLINK
Ether
net
