29
13. Dial Back Delay: Determines how much time will elapse between each dial
back attempt (default is 30 seconds).
When you have finished selecting parameters from the General Parameters menu,
press
[Esc]
to return to the main Help screen. Menu-selected parameters will be
stored in the modem’s non-volatile memory.
5.3 The Modem Parameters Menu
The Modem Parameters menu is used to select communication parameters for
both the Secure Rack Modem’s internal modem and the serial modem port. To
display the Modem Parameters menu, access the Command mode as described in
Section 5.1
, then type
/M
and press
[Enter]
.
Figure 5-3. The Modem Parameters menu.
To change the setting for any item in this menu, key in the number for the desired
item, press
[Enter]
, and follow the instructions in the submenu. The Modem
Parameters menu includes the following items:
1. Baud Rate: The operating baud rate for the Secure Rack Modem’s modem
and serial modem port. If you reinitialize the unit, the baud rate will return
to the default value selected by setup switches #1 and #2 (select the default by
setup switches #1 and #2; factory setting is 9600).
MODEM PARAMETERS
1. Baud Rate:
9600
2. Bits/Parity:
8-None
3. Stop Bits:
1
4. Flow Control:
RTS/CTS
5. Local Echo:
Off
6. Rings to Answer:
1
7. Quiet Mode:
On
8. Result Codes:
Verbose
9. Speaker:
On
10. Error Control:
On
11. Compression:
On
12. Reset String:
ATZ
13. Custom Init String:
(undefined)
14. Hang-Up String
(undefined)
Enter Selection,
Press <Esc> to abort…
CHAPTER 5: Setup and Configuration
