16
SECURE RACK MODEM
2. View/Set Modem Parameters: Type
/M
and press
[Enter]
to display the
Modem Parameters menu. You’ll use this menu to select communication
parameters for the SRM’s internal modem as described in
Section 5.3
. Press
[Esc]
to return to the main menu.
3. Utilities Menu: Type
/U
and press
[Enter]
to display the Utilities menu.
You’ll use this menu to access the modem’s command features, such as the
Pass-Through mode, the Download Parameters function, and others. Press
[Esc]
to return to the main menu.
4. Other Menus: At this point, commands such as “View Password Directory”
and “View Audit Log” will not display much information. This is because the
Password directory has not been defined yet, and the Audit log has not had
the opportunity to record connection activity. If you wish to display these
menus, key in the appropriate command and then press
[Enter]
. To exit a
menu, press
[Esc]
to return to the main menu.
5. Exit/Disconnect: When you have finished exploring the various modem
command menus, return to the “SRM>” command prompt, and then type
/X
and press
[Enter]
to exit from command mode.
This completes the introductory overview of the Secure Rack Modem. To
demonstrate the modem’s security functions, you must completely install the unit,
and define the Password directory as explained later in this manual. Refer to
Chapters 4
through
6
for complete installation and configuration instructions.