101
5.0 Hayes Emulation Mode
Table 5-1 (continued). Hayes Compatible Commands.
COMMAND FUNCTION/EXPLANATION
&T
Test Commands
&T0
Terminates a test in progress.
&T0
must be the last
command in a command line.
&T1
Initiates a local analog loopback test.
&T3
Initiates a local digital loopback test.
&T4
Allows the local modem to accept a request from the
remote modem for a remote digital loopback test.
&T5
Prevents the Modem from accepting a request from the
remote modem for a remote digital loopback test.
&T6
Initiates a remote digital loopback test.
&T7
Initiates a remote digital loopback test self-test.
&T8
Initiates a local analog loopback self-test.
&V
View Active Configuration, etc
.
&V0
Displays modem configuration, user profiles and phone
numbers stored in memory cells 0-5.
&V1
Displays all stored phone numbers (contents of memory
cells 0-9).
&W
Write Profile To Memory
&W0
Saves storable configuration parameters as
user profile 0.
&W1
Saves storable configuration parameters as
user profile 1.
&X
Transmitter Clocking *
&X0
Selects internal clocking.
&X1
Selects external clocking.
&X2
Selects receive mode (slaved) clocking.
&Y
Default User Profile
&Y0
Stored user profile 0 will be recalled on powerup.
&Y1
Stored user profile 1 will be recalled on powerup.
Default settings (where applicable) are in
bold face
.
* If user profile 1 is active, options are controlled (for Hayes mode
operation) by given commands or Summary Setup. Do not change via
front panel (except via Summary Setup).