Black Box LWE121A Скачать руководство пользователя страница 4

Страница: 4 / 36

Page 4

724-746-5500 | blackbox.com

Chapter 2: Preparing for Installation

2. Preparing for Installation

This chapter describes safety precautions and product information you have to
know. Read this chapter before installing the Wireless Ethernet Extender.

Professional Installation Required

Seek assistance from a professional installer who is well trained in RF installation
and knowledgeable in the local regulations.

Safety Precautions

To keep you safe and install the hardware properly, read and follow these safety
precautions.

1. If you are installing the Wireless Ethernet Extender for the first time, for your

safety as well as others’, please assistance from a professional installer who has
received safety training on the hazards involved.

2. Keep safety as well as performance in mind when selecting your installation

site, especially where there are electric power and phone lines.

3. When installing the Wireless Ethernet Extender, note the following things:

• Do not use a metal ladder;

• Do not work on a wet or windy day;

• Wear shoes with rubber soles and heels, rubber gloves, and a long-sleeved shirt

or jacket.

4. When the system is operational, avoid standing directly in front of it. Strong RF

fields are present when the transmitter is on.

Installation Precautions

To keep the Wireless Ethernet Extender well while you are installing it, read and
follow these installation precautions.

1. Users MUST use a proper and well-installed grounding and surge arrestor with

the Wireless Ethernet Extender; otherwise, random lightning could easily cause
fatal damage to the unit.

WARNING: EMD (Lightning) DAMAGE IS NOT COVERED UNDER

WARRANTY.

2. Users MUST use the power cord and PoE injector shipped in the box with the

Wireless Ethernet Extender. Using other options will damage the unit.

Содержание LWE121A





































Результаты поиска

Содержание LWE121A

Отзывы:

Похожие инструкции для LWE121A

Бренды по названию

Популярные бренды

Black Box LWE121A, Быстрое руководство по установке модемной карты

Результаты поиска

Содержание LWE121A

Отзывы:

Похожие инструкции для LWE121A

Бренды по названию

Популярные бренды