96
4.1 Configuration Tools
The Configuration Tools screen allows you to save (
Backup
) the router’s current configuration
setting. Saving the configuration settings provides an added protection and convenience should
problems occur with the router and you have to reset to factory default. When you save the
configuration setting (Backup) you can re-load the saved configuration into the router through the
Restore
selection.
If extreme problems occur you can use the
Restore to Factory Defaults
selection, this will set all configurations to its original default settings (e.g. when you first
purchased the router).
Parameters
Description
Configuration Tools
Use the "
Backup
" tool to save the Broadband router current
configuration to a file named "config.bin" on your PC. You can
then use the "
Restore
" tool to restore the saved configuration to
the Broadband router. Alternatively, you can use the "
Restore to
Factory Defaults
" tool to force the Broadband router to perform
a power reset and restore the original factory settings.
Содержание LW6005A-R2
