9
8: Reboot the PC. Your PC will now obtain an IP address automatically from your
Broadband Router’s DHCP server.
Note
: Please make sure that the Broadband router’s DHCP server is the only DHCP server
available on your LAN.
Once you’ve configured your PC to obtain an IP address automatically, please proceed to
Step 3
2b) Windows XP
1: Click the
Start
button and select
Settings
, then click
Network Connections.
The
Network
Connections
window will appear.
2: Double-click
Local Area Connection
icon. The
Local Area Connection
window will
appear.
3: Check your list of Network Components. You should see
Internet Protocol [TCP/IP]
on
your list. Select it and click the
Properties
button.
4: In the Internet Protocol (TCP/IP) Properties window, select
Obtain an IP address
automatically
and
Obtain DNS server address automatically
as shown on the following
screen.
Содержание LW6005A-R2
