Black Box LS1016A, Руководство пользователя

Страница: 173 / 450

Chapter 3 - Additional Features
User Guide 173
Step 3: Select the General link.
Click on the General link on the Link Panel to the left of the page in the Configuration
section. This will take you to the General page.
Step 4: Scroll down to the Data Buffering section.
You can change the Data Buffering Facility value (conf.DB_facility). Click the Submit
button.
Step 5: Select the Serial Ports link.
Click on the Serial Ports link on the Link Panel to the left of the page in the
Configuration section. This will take you to the Port Selection page.
Step 6: Select port(s).
On the Port Selection page, choose all ports or an individual port to configure from
the dropdown menu. Click the Submit button. This will take you to the Serial Port
Configuration page.
Step 7: Scroll down to the Data Buffering section.
You can change the “Alarm for Data Buffering” (.alarm) value. Click the Submit
button.
Step 8: Select the Syslog link.
Click on the Syslog link on the Link Panel to the left of the page in the Configuration
section. This will take you to the Edit the Syslog-ng Configuration File page.
Step 9: Make the changes effective.
Click on the Administration > Run Configuration link, check the Serial Ports/
Ethernet/Static Routes box and click on the Activate Configuration button.
Step 10: Click on the link Administration > Load/Save Configuration.
Step 11: Click the Save Configuration to Flash button.
The configuration was saved in flash.