Black Box LR0304A-KIT, Руководство пользователя

Страница: 14 / 16

724-746-5500 | blackbox.com
Page 14
4-Port and 8-Port T1/E1 Ethernet Network Extender Kits
[E1/T1 Settings]:
System Clock Source .....................: Internal (Master) External (Slave)
Subscriber Interface ......................: E1 | T1
Frame Mode ..................................: CRC4 | CAS | CAS+CRC4
LIU Line Code ................................: HDB3 | AMI
56k/64k Channel ...........................: Nx64k | Nx56k (for T1 only)
LIU Impedance ..............................: 120 ohm | 75 ohm
Loopback Testing ..........................: [START]
[Ethernet Settings]:
LAN2 ...............................................: Auto Nego | 100-Full | 100-Half | 10-Full | 10-Half
LAN1 ...............................................: Auto Nego | 100-Full | 100-Half | 10-Full | 10-Half
[Activate the Configurations]
[Status]:
[UP][DOWN] -move cursor [SPACE] -select [ENTER] -confirm [Q][q] -quit
Figure 4-3. Options for each item: LR0304A-KIT.
The options for each item are shown in Figure 4-3.
Press the [enter] at the item “Loopback Testing” to enable the E1/T1 loopback testing, and the status will show the loopback
status. To end the loopback testing, press the [Q] or [q] key to stop and go back to normal E1/T1 connections.