Black Box LR0304A-KIT, Руководство пользователя

Страница: 12 / 16

724-746-5500 | blackbox.com
Page 12
4-Port and 8-Port T1/E1 Ethernet Network Extender Kits
4. RS-232 Console Configuration
4.1 RS-232 Console Connection Setup
LR0304A-KIT provides an RS-232C console port to monitor the OA&M status through a VT100 terminal. Follow the steps listed
below to connect the console port from the extender to the terminal.
1. Attach the DB9 female connector of the included RS-232 console cable to the male DB9 serial port connector on the rear panel
of the extender. Then attach the other end of the DB9 cable to an ASCII terminal emulator or PC COM-1, 2 port. For example,
PC runs Microsoft
®
Windows
®
HyperTerminal utility.
2. At “Com Port Properties” Menu, configure the parameters as below:
Baud rate: 9600
Stop bits: 1
Data bits: 8
Parity: N
Flow control: none
3. Press the <ESCAPE> key and the main menu will appear on the terminal’s screen.
NOTE: If you press the <ESCAPE> key and the screen of the terminal does not display, the COM port might be set incorrectly.
Choose the correct COM port (COM1 or COM2) on the computer and press the <ESCAPE> key again to make sure that
the main menu appears on the terminal screen.
VT100/102 Terminal PC COM Port
RS-232 Cable
Baud rate: 9600
Stop bits: 1
Data bits: 8
Parity: N
Flow control: none
Figure 4-1. Connection for console port with RS-232 terminal.