manualshive.com logo in svg

Black Box Lineshare Pro AC FX150A, Руководство пользователя

Поделиться
Скачать
Black Box Lineshare Pro AC FX150A Скачать руководство пользователя страница 37

38

LINESHARE PRO

The following sections contain

specific information about each
feature and function and how to
change the setting.

5.4  Changing ON/OFF features

Earlier in this chapter, 

Table 5-1

listed the features that can be turned
ON or OFF individually, or
simultaneously with other features
during a single programming
session. The features are numbered
[0] through [9]. In this section, you
will find a description of each
feature and instructions for turning
the feature ON or OFF.

To turn a feature ON or OFF, use

the following steps:

1. Press # * from a tone phone

connected to Port 1 to enter the
programming mode.

2. Turn the feature ON by pressing

1 followed by the feature
number. Turn the feature OFF
by pressing 0 followed by the
feature number.

3. Press * to end the programming

sequence.

4. Continue performing steps 2

and 3 until all the desired
features have been changed.

NOTE

You have 5 seconds between
each tone entry to enter
another command. If you do
not enter a command within
5 seconds, the Lineshare Pro
exits the programming mode
without saving the changes.

5. When you are finished making

changes, press the * key again to
save the changes and exit the
programming mode.

Example

: To turn Home Routing ON,

enter the programming mode and
press 1 1 *. Press * again to save the
changes, and exit the programming
mode. To turn Home Routing OFF,
enter the programming mode and
press 0 1 *. Press * again to save the
changes, and exit the programming
mode. 

[0] Extension Detection

Extension Detection operates only
when the Lineshare Pro is
configured in the non-secured
mode, and when an inbound
telephone call is ringing PORT 1 (or
the primary default port).

This feature allows the Lineshare

Pro to detect when an extension
phone not directly connected to the
Lineshare Pro answers a call that is
actively ringing the primary default
port. When the Lineshare Pro
detects that the extension phone has
gone off-hook, it releases the call to
the extension phone and stops
ringing the primary default port.

The Extension Detection feature is

Содержание Lineshare Pro AC FX150A




















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды