manualshive.com logo in svg

Black Box Lineshare Pro AC FX150A, Руководство пользователя

Поделиться
Скачать
Black Box Lineshare Pro AC FX150A Скачать руководство пользователя страница 24

25

LINESHARE PRO 

The Lineshare Pro has two basic

modes of operation:

• In the 

secured mode

, when a call

comes in, the Lineshare Pro
answers the call on the first 
ring and waits silently for a pre-
specified routing tone. The
Lineshare Pro will wait for the
amount of time set in the Time
at Home function. If the
Lineshare Pro does not receive 
a routing tone before this time
expires, the call is disconnected.
If the Lineshare Pro receives a
routing tone, the call is
automatically routed to the
correct port.

• In the 

non-secured mode

, when a

call comes in, the Lineshare Pro
answers the call on the first ring,
and then provides a ring-back
tone to the caller. This tone is
intended to make the routing
process transparent to the caller.

After the Lineshare Pro answers

the call, it listens for various routing
tones or access codes. See 

Sections

4.10 

and 

4.13

for more information.

If the Lineshare Pro does not

detect a signal, it routes the call to
the first port in the Cascade Port
Order (primary default port). When
the phones connected to that port
ring, it means that the call is coming
from one of the following
(depending on your configuration):

• a person wanting to talk to you

• a person sending a fax manually

• a fax machine that does not

produce CNG signals

• a person trying to access a port

• a modem device not using the

proper access codes or protocol
tones

If after six rings to the primary

default port/Port 1 (four rings to
Ports 2, 3, and 4), the call remains
unanswered, the Lineshare Pro will
automatically route the call to the
next port in the Cascade Port Order.
For any future calls, the Ring
Reduction feature engages and the
Lineshare Pro routes calls to the
next port in the Cascade Port Order
after the second ring.

Содержание Lineshare Pro AC FX150A




















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды