manualshive.com logo in svg

Black Box Lineshare Pro AC FX150A, Руководство пользователя

Поделиться
Скачать
Black Box Lineshare Pro AC FX150A Скачать руководство пользователя страница 33

34

LINESHARE PRO

If the Lineshare Pro does not

enter the programming mode (the
green LED continues flashing), try
again with a different phone.

When you are in the programming

mode and entering changes, the
Lineshare Pro notifies you of correct
or incorrect entries with the
following signals:

• Three short beeps:  Indicates 

that the entry is valid, and the
Lineshare Pro has accepted the
change.

• Single low beep:  Indicates that

the entry is invalid, or out of
normal operating range, and the
Lineshare Pro did not accept the
change. Re-enter the command
string with a valid entry.

NOTE

All programming commands
end with a * key.

5.2  Lineshare Pro Features

Tables 5-1

and 

5-2 

list the Lineshare

Pro’s capabilities, factory settings,
and available options. The sections
that follow 

Tables 5-1

and 

5-2

explain the features and functions 
n detail and provide guidelines for
changing the program settings.

Enter the programming mode 

by pressing # *.

Press 0 in front of a feature

number to turn the feature OFF.

Press 1 in front of a feature

number to turn the feature ON.

Exit the programming mode 

by pressing * *.

Содержание Lineshare Pro AC FX150A




















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды