Black Box Mixed-Media Fiber Hubs
Installation and User Guide (4/99)
5
2.0
Introduction - LH8050A Mixed-Media Fiber Hub
2.1
Inspecting the Package and Product
Examine the shipping container for obvious damage prior to installing this product;
notify the carrier of any damage which you believe occurred during shipment or delivery.
Inspect the contents of this package for any signs of damage and ensure that the items listed
below are included.
This package should contain:
1 - LH8050A Base Unit (does not have PMs factory configured)
1 - AC Power Cord (U.S. and other 115 vac only)
1 - Set of metal "Ears" for optional 19” rack mounting
1 - Installation and User Guide
For blank cover plates, order Model
LH8057A-PNL. (see previous page for descriptions)
Note: Port Modules (PMs) purchased for field installation will be boxed individually in a
“bar-of-soap-size” cardboard carton with labeling on the box to indicate the contents.
LH8050A-xxx, models with Switch Port Modules in the Bonus Port (see previous page for product
descriptions) come with 10
Model
LH8057A-PNL blank slot panels each.
Model LH8050A-special, for add-on to stack, comes with Stacking Cable, 9” length
Remove the unit from the shipping container. Be sure to keep the shipping container
should the unit need to be shipped at a later date.
In the event there are items missing or damaged contact Black Box. If the unit needs
to be returned, please use the original shipping container. Refer to Chapter 6, Troubleshooting,
for specific product return procedures.
